Specifications

Adjustment options
Version 2011v1 17
2.3 Adjusting the back-support angle
• See fig. 010503010.
For optimal seating comfort the angle (B) of the backrest can
be adjusted continuously.
The angle of the backrest can be adjusted as follows:
• Loosen the two Allen bolts (A) on the left side of the
back, under the seat, two turns with an Allen key with
a key width of 4 mm.
• Adjust the desired back angle (B).
• Tighten the Allen bolts again.
EBAPUM-010503010.nl.doc
2.4 Adjusting the legrests
• See fig. 010504000.
Adjustment possibilities of the legrests:
A. Length.
B. Width.
C. Depth.
Legrests also have an optional angle adjustment.
XXXXXXX-010504000.en.doc
2.4.1 Adjusting the length of the lower-legrests
• See fig. 010504010.
The adjustment of the length (L) of the legrests should be
done as follows:
• Loosen the set bolt (A) a few turns with an Allen key
with a key width of 4 mm.
• Adjust the length of the legrest.
• Tighten the set bolt again.
Make sure that there is sufficient free space
under both footplates to be able to drive the
wheelchair over obstacles, without impacting
the footplates.
XXXXXX-010504010.en.doc
B
A
010503010
C
B
A
010504000
AL
010504010