Specifications

Adjustment options
14 Version 2011v1
2.2 Seating adjustments
• See fig. 010502000.
B
C
D
E
A
F
010502000
The following parts of the seating system can be adjusted:
• The height (A). See 'Adjusting the seat height'.
• The depth. See ‘Adjusting the seat depth' (B) and 'Position of the seat cushion' (C).
• The width (D). See 'Adjusting the seat width'.
• The back angle (E). See 'Adjusting the back-support angle'.
• The seat angle (F). See 'Adjusting the seat angle'.
EBAPUM-010502000.nl.doc
2.2.1 Adjusting the seat height
• See fig. 010502010.
A good seat height setting is important to be able to easily take a
seat at tables and desks. A minimum seat height is also important
in order to keep the footplates free from ground obstructions
(thresholds, curbs etc).
The seat height will generally be an average level between these
two.
The seat height of the Puma Kinetic wheelchair can be adjusted
to five levels.
The chair is installed on an interface, which is equipped with
tubing. This interface can be adjusted on the carrier to 5 different
heights, in 25 mm steps. Depending on the desired seat height
the interface can be adjusted one or more holes: upward or
downward.
For the seat height adjustment you should leave the
wheelchair. The adjustment must be done as follows:
• Loosen the Allen bolts (A) on both sides of the carrier with an Allen key with a key width of 8 mm and
remove them.
A
B
010502010