TRANSMITTER/ RECEIVER WITH BLUETOOTH® WIRELESS TECHNOLOGY PART NUMBER PABT100 DESIGNED TO ADD BLUETOOTH® FUNCTIONALITY TO AUDIO DEVICES pulseaudio1.com | vanco1.com | 800.626.
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. THIS PRODUCT IS 100% INSPECTED AND TESTED IN THE UNITED STATES TO VERIFY PERFORMANCE PARAMETERS. WARNING 1. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 2.
FEATURES The Pulse Audio PABT100 Bluetooth Transmitter & Receiver, is specially designed for Audio Devices (such as MP3, MP4, TV and PC, etc.) that are without Bluetooth functionality. As a Bluetooth Transmitter, you can connect audio devices without Bluetooth using the included 3.5mm Audio Plug, allowing it work to with Bluetooth-enabled headsets and speakers.
PANEL DESCRIPTIONS LED DESCRIPTIONS Status of Device.................................................LED Status In charging............................................................Red LED turns on Finish charging...................................................Red LED turns off Power On..............................................................Blue LED flashes faster Power Off..............................................................LED Off Receiving: Receive mode...............................
CONNECT AND OPERATE Receiving Mode: 1. Connect an audio cable into the “RECEIVE” jack on the PABT100 with the other side of the cable connected to the device that will be receiving the audio (ex: audio power amplifier). 2. Power on the device: If you are utilizing the integrated rechargeable battery, charge first then once the unit is charge press and hold the multifunction button for 5 seconds to power the device ON.
BATTERY Please fully charge the device before using. 1. Insert micro USB plug into the device, and another side to the power adapter. 2. During the charge, the RED light turns on 3. When charging complete (around 2 hours), the RED light turns off. SPECIFICATIONS Bluetooth Version..............................................Bluetooth 2.1 Supported protocols........................................A2DP, AVRCP, HFP, SPP HID Current Consumption.......................................
TECHNICAL SUPPORT In case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445. You can also email technical support issues to techsupport@ vanco1.com. When calling, please have the Model Number, Serial Number (affixed to the bottom of the unit) and Invoice available for reference during the call. Please read this Instruction Manual prior to calling or installing this unit, since it will familiarize you with the capabilities of this product and its proper installation.
Vanco ® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 | fax: 630.879.9189 visit: www.vanco1.com Introducing a new brand from Learn more at pulseaudio1.
