User Manual

PANEL DESCRIPTIONS

1. MODE selection between Stereo, Mono, or Bridge

2. Connection to speakers using the included phoenix connector

• For stereo operation, connect the Left and Right speaker wires to the

corresponding terminals

• For bridge-mono operation, connect the positive speaker wire to the L+

and the negative speaker wire to the R+ terminals

3. Connect a source device to the INPUT terminals - 3.5 or RCA*

• 3.5mm connection

• RCA connection

4. Connect the included power supply (115/230V input)

*NOTE: When both source inputs are connected, the 3.5mm input and RCA

inputs mix