User Manual

CONNECT AND OPERATE

1. Connect an audio source to any of the inputs on the Transmitter unit

2. Set the switch on the transmitter to the corresponding input that will be transmitting the

audio (1: Toslink, 2: RCA-Coax, 3: 1/8” Stereo Jack)

3. Connect a well terminated Cat5e/6 cable to the RJ45 port on the transmitter and receiver

4. Connect audio output(s) to your audio device(s) (ex: ampliﬁer) using the toslink, coax, or

dual-RCA outputs

5. Connect power to the Receiving unit

6. Turn on source and audio output device(s) and test