User manual

MIX fader to lower the signal levels. Sig-

nals may be distorted if the signal levels

are set to high.

ALT 3-4 outputs are unbalanced and

carry the signal of the channels that you

have assigned to this group using the

mute switch. This can be used to route a

subgroup to a further mixing console for

example, or used as a recording output

working alongside the main output.

MAIN MIX FADER - The faders are used

to control the overall signal levels from all

channels.

NOTE: There is a BNC connector for connecting a 12V BNC type lamp for

lighting up the mixer, ideal when you in a dark or poorly lit area .

PROGRAM

The dial can be used to scroll through and pick the program effect that you

want. The display ashes the number of the current preset. To recall the se-

lected preset, press the button; and the ashing stops.

24-BIT MULTI-EFFECTS PROCESSOR

This built in effects module produces various effects including reverb, chorus,

anger and other various combination effects. The advantage of the effects

module being integrated is that it requires no wiring. This way there is no

chance of creating ground loops or uneven sound levels. These effects are

designed to be added to dry signals. If you move the FX TO MAIN control, you

mix the channel signal (dry) and the effect signal.