User`s manual

58
8.1. Terminal commands
8.1.1. General
TIME [HH:MM[:SS]] Read or set time in RTC
DATE [MM.DD.YY] Read or set date in RTC
SETRD Par Set the Ramdisk size, hexagonal input in paragraphs (80-180 32k
to 96k)
RESET Reset Gateway
VER Readout of firmware version
PASS Set access password
LOGOUT Log out
GETSN Writes out the gateway serial number
GETSMSMODE Writes out information on the SMS receiving mode
GETTYPE Type of the gateway (1- 50208x 0- 50207x)
8.1.2. Disk system
UL disk: .. Upload file
DL disk:file.ext Download file
ULM Upload firmware
ULB Upload Bios
DEL disk:file.ext Delete file
REN disk:oldfile.ext,Newfile.ext Rename file
DIR disk: Readout of the disk contents
FORMAT disk: Format disk
DLLOG Download LOG
REMOVELOG Delete LOG
DLSMS Download received SMS
REMOVESMS Delete SMS
8.1.3. Communication with GSM modules
PIN module,PIN Enter PIN for module
PUK module,PUK Enter PUK and PIN for module
SMS module,number,text Send SMS from module to number
SMSPDU module,handle,Len,pdu sends SMS from module in PDU format
GSMINFO module Readout information on GSM module
SMSSTAT Readout information on received SMS status
GETFM module Readout information on free minutes on module
SETFM MOD,MIN,DAY,FIRST,NEXT,ACTMIN Set information on free minutes
min number of free minutes in month (default 0)
day day in month for new free-minute recording (1)
first number of seconds in the first tariff rate pulse (0)
next number of seconds in next tariff rate pulses (1)
actmin number of minutes used (0)
The PIN is stored in the CMOS and the GSM gateway remembers the number and PIN
of the last SIM card. If it finds out that it the SIM card number matches the CMOS
number, the PIN error counter is 3 and the card requires PIN, the gateway enters the PIN
itself, if not you have to enter your PIN or PUK manually.
SMSSTAT returns either PRESENT if there are some SMSs on disk 3, or EMPTY if not.