User`s manual

6.5.7.2 Priorities

Fig. 49: Priorities

Define in this chart in what sequence outgoing ports (TE, GSM1, GSM2) should be

engaged. Select the priorities for each destination and subrate separately! Remember

that outgoing calls are also governed by the Barred outgoing call destination chart.

• Subrates – you have folders for each subrate in the upper part of the chart to be filled

in.

• Destination – here add names of outgoing call destinations We recommend you to set

Local, national, International and GSM provider destinations at least. (Be sure to

complete the Destination priority for each of them).

• Destination priority – here enter the sequence of outgoing calls. (If the destination on

the first line is occupied, the destination on the next line is used for outgoing calls. If all

filled-in destinations are engaged, the outgoing call is rejected). If you use the GSM

routing mode “According to position”, you can select GSM1 (GSM module 1) and

GSM2 (GSM module 2) in the list of destinations.

* Be sure to select correct GSM providers in GSM destinations.