User`s manual

6.5.5.2 Allowed outgoing call destinations
This chart enables you to make a list of individual numbers or parts of destinations that
can be called in spite of the fact that they lie in a restricted destination or the prefix is
included in the ”Restriction > Barred outgoing call destinations” section (if, e.g., the global
restriction “Long-distance” is selected in the Barred outgoing call destination chart and
prefix “05” is entered into the Allowed destination chart, then outgoing calls to Brno are
allowed only). You can work with the chart as with a text file by means of the “Edit”
function.
6.5.5.3 Barred incoming call numbers
With this chart you can make a list of numbers of subscribers whose all calls are to be
rejected. Caution: This function works only if the calling subscriber has not activated
CLIR (non-public number). Numbers should be entered including prefix, for example:
0603xxxxxx. Be sure to activate the CLIP function (see 0) for this function on
incoming ports.
6.5.6. System parameters
6.5.6.1 Remote access
The ISDN GSM gateway supports remote
supervision including download of firmware,
the configuration file and a file monitoring the
gateway operation via GSM network.
Remote access enable - enables or disables remote access.
Remote supervision from the GSM network is always activated for data calling.
Fig.46: Remote access
6.5.6.2 Trace
51
This chart makes it possible to record
individual events occurring during gateway
operation. This file may be used for
diagnostic purposes or check of operation
and costs if necessary (cdr information).
Moreover, you can activate the automatic
diagnostic SMS sending function here*,
giving details on the ISDN GSM gateway
status. Function „Restart at“ makes it
possible to automatic restart of the GSM
gateway every day at defined time.
Attention! All events are saving to RAM
memory! When the gateway is switched off
the RAM memory will be erased!
Fig.47: Trace