User manual

7.3.4. Example of a Table
Note: I’m sorry this example (GSM Gateway T- Mobile, location Czech republic, Prague)
is not very helpful for other countries; better one is under preparation.
xxx1 xxx2 xxx3 xxx4 xxx5 xxx6 xxx7 xxx8 xxx9 xxx0
Par.
No.
Begin of
number
Call
enable
call
routing
Number
length
End
#
End
*
Initial
tariff
Impulses
per [ms]
Take
away
Appe
nd
Notes
501x 0 yes PSTN - yes yes 0 - Trunk calls
502x 02 no PSTN - yes yes 0 - Prague
503x 020 yes PSTN - yes yes 0 -
020 is not
Prague!
504x 072 yes GSM 10 1 60 0 - GSM Eurotel
505x 073 yes GSM 10 1 120 0 -
GSM T-
Mobile
506x 077 yes GSM 10 1 60 0 - GSM Oscar
507x 0609 no - 1 1,5 0 -
„VAT
services“
508x 0800 yes PSTN 10 0 -
Free
services
509x 00 no PSTN - 0 -
International
calls
510x 7531 yes PSTN - yes yes 4 00
International
via password
511x 0042072 yes GSM 14 1 60 0 - GSM Eurotel
512x 0042073 yes GSM 14 1 120 0 -
GSM T-
Mobile
513x 0042077 yes GSM 14 1 60 0 - GSM Oscar
514x 112 yes GSM 3 0 0**) 0 -
Emergency
call
...
530 Empty
599 Other yes PSTN 6 0 -
Notes:
• As you can see, columns 7 and 8 are not filled for PSTN calls, because tariff impulses can
be only passed thru from PSTN.
• The above-mentioned tariff rates are fictitious, not corresponding to any real situation!!!
• Empty fields are not important for this example.
54