User manual

i-Flash Technology Limited
Rm 1110, 11F, Fabrico Industrial
Buildings, 78 Kwai Cheung Road,
Kwai Chung, NT. Hong Kong
Web:
Tel:
Fax:
Email:
www.iflashtec.com
[phone]
[phone]
[e-mail]
PULSE FXI6 Series Installation Guide
17 | P a g e
NOTE: The users might need to configure the Primary Stream and Secondary Stream properly.
Sometimes, the user might like to watch the live video stream from the web GUI in low resolution mode
while recording a copy via “Surveillance System” software in high resolution due to the limitation of
internet bandwidth. In this case, for example, primary stream can be configured to have better
resolution, and then the users can use primary stream to record while watching secondary video
streams.
Audio Settings
Preferred Audio Codec – The FXI6 supports up to 3 different Vocoder types, a-law
(PCMA), u-law (PCMU) and G.726. The audio can also be turned off by switching the setting
to “Disabled”
Power Frequency - this setting should match the power frequency used in the country to avoid flickering
in the image