i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Safety Instruction These instructions are intended to assist users with the operation of the FXI6 and also to instruct on how to avoid dangerous situations or damage to the device. Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Notice： Make sure that the power supply voltage is correct before using the camera. Do not drop the device or expose it to physical shock. Do not expose the device to temperatures outside the range of -10 C to +50C when the device is in operation.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Welcome The FXI6 is a next generation mini IP dome camera for remote monitoring and surveillance over your LAN or internet. The FXI6 combines best in class IP video technology and SIP protocols for a robust IP surveillance solution. The product features H.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com FXI6 Key Features P2 (2MP) Video Compression Image Sensor P13 (1.3MP Low Lux WD) P30 (3.1MP Low Lux WD) Pixel Dynamic Range Frame Rate Compressed Video Output rate Audio Input Audio Compression Standard Audio Compression Rate Network Connection Power Operation Temperature H.264, Motion JPEG 1/3.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Installation Guide Minimum Recommended System Requirement • Windows 2000 Server Professional, Windows XP, Windows Vista, Windows 7 • CPU: Intel Pentium 4 or higher, 2 GHz. • RAM: 1 GB (4 GB recommended for larger systems). • Support for DirectX 8.0 and above.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Configuring the FXI6 via Web Browser The FXI6’s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer. Access FXI6 Web Configuration Menu Connect the Camera to DHCP server. 1.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Connect to the Camera using Static IP If the camera does not get response from DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168. 1. Connect your PC to the same network as the FXI6. 2. Configure the IP address of your PC to: 192.168.1.
i-Flash Technology Limited Web: Tel: Fax: Email: Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com FXI6 Home Web Page 1 Motion Detection 2 Control Console 3 4 5 6 ZOOM Focus PTZ Speed Default PULSE FXI6 Series Installation Guide If the motion detection alarm is triggered, the indicator will flash red. Click on the indicator to turn off the alarm. PTZ Console controller.
i-Flash Technology Limited Web: Tel: Fax: Email: Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong 7 8 9 BRIGHTNESS CONTRAST View Size 10 11 12 13 Configuration Language Play / Stop Capture 14 Record 15 16 17 18 Sound Off/On Talk Playback Config PULSE FXI6 Series Installation Guide www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Adjusts the image brightness.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com FXI6 System Page The page allows you to configure the system setting on FXI6 Current System Time - displays the current date and time (24h clock).
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Device Name Setting –This field lets you configure the name of the FXI6, which helps “Search” and “Surveillance” Software to identify the device in the same subnet. Video & Audio Page On Screen Display (OSD) Settings OSD Time/ Text – The time stamp and channel name displayed on the screen.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Video Settings Preferred Video Codec Resolution Bit Rate Maximum Frame Rate Bit Rate Control Image Quality I-frame Interval – The FXI6 supports the H.264 video codec. – The higher the resolution is, the better the video quality is, and higher bandwidth is required.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com NOTE: The users might need to configure the Primary Stream and Secondary Stream properly.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Networking Page – Assign an IP to FXI6 FXI6 supports IP version 4. The IP address can set automatically via DHCP, or a static IP address can be set manually. To make FXI6 work properly, the user needs to set the DNS configuration properly.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com HTTP Port The FXI6 supports user configured http ports. If the HTTP port is changed, the port number is needed to access the web GUI, for instance: http://192.168.1.168:8080. NOTE: If the HTTP Port is 80, when you add this device to Surveillance Software, the RTSP port is 554.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Set up DDNS 1. Apply for a domain name from your service provider. 2. Login to the web configuration page, click Basic Settings > DDNS. 3. Enter the required information DDNS Active – If you want to use DDNS, please set this field to “Enabled” . DDNS ISP Type – Select your DDNS ISP Type.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com SIP Page The FXI6 has the ability to receive phone calls and make phone calls when an alarm event is triggered through motion detection or alarm input. Register the FXI6 to a SIP server to enable the product to make and receive phone calls.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Register FXI6 to a SIP Server 1. From the FXI6 home page, click Basic Settings > SIP. 2. Go to SIP Settings Tab. 3. General Phone Settings. Registered – The field shows the registration status of the account with the SIP server.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Configure Phone List Page To make sure the FXI6 can make phone calls to the number you preferred when alarm is triggered. You need to add number to the phone list. Steps to add phone number: 1. From the FXI6 home page, click Basic Settings > SIP. 2. Go to Phone List Tab. 3.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com System Up Time Since – This field shows the system up time since the last reboot. Network Status MAC Address – The device ID, in HEXADECIMAL format. LAN IP Address – This field shows the LAN IP address of the FXI6. LAN Subnet Mask – This field shows the LAN subnet mask of the FXI6.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com FXI6 User Management Page All current users will be list in the User List section of this page. You can also add and remove users here. Existing User Name –The field lists all of the current users. You can insert or remove users from the list by click on the Add or Update or Delete button.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com FXI6 Maintenance Page Server Maintenance Restart – Click this button to restart the FXI6. Restore – Click this button to perform a partial factory reset (The IP address will not be cleared). Restore the Device Click “Restore” to reset the camera to default factory setting, except IP Address.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Performing a firmware upgrade: 1. Download the firmware package from www.i-flashtech.com 2. Unzip the firmware package and copy the files to the firmware upgrade server directory. Upgrades are supported via TFTP, HTTP and HTTPS. 3. Log in to the Maintenance page of the FXI6.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com SMTP Server Settings Enable SMTP – Checked to enable SMTP SMTP Server – The IP or hostname of the SMTP server, for example, smtp.gmail.com. SMTP Server Port – The port of the SMTP server. The FXI6 supports port 25 and SSL port 465, which is for SMTP with an encrypted connection.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Path – The directory in the FTP server where recorded video will be uploaded. Test FTP Account Settings – Click the Test button to upload a sample file to make sure that FTP is properly configured.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Motion Detection Page The FXI6 supports Motion Detection. To utilize this feature, please follow the below steps: 1. Setup the motion detection monitored area. 2. Configure the motion detection time schedule. 3. Configure alarm action properly.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com Configure Motion Detection Time Schedule & Alarm Actions This section allows you to configure the time during which the FXI6 will monitor the motion detection. The FXI6 not only can monitor your settings but also can take actions when the alarm is triggered.
i-Flash Technology Limited Rm 1110, 11F, Fabrico Industrial Buildings, 78 Kwai Cheung Road, Kwai Chung, NT. Hong Kong Web: Tel: Fax: Email: www.iflashtec.com +852 2110 9587 +852 3585 5233 info@iflashtec.com FXI6 System Log This page is used to set up the system log server path and system log level. Once they are correctly configured, the device will send out system log messages to the system log server, which will help perform troubleshooting. Syslog Server – The IP address or URL of System log server.
