User`s guide

70 CHAPTER 6: TECHNICAL REFERENCE
*Requires @ in dial string; replaces NO CARRIER
Yn Selects power-on/reset default configuration.
Y0 Use profile 0 setting in NVRAM
Y1 Use profile 1 setting in NVRAM
Y2 Use factory configuration 0.
Y3 Use factory configuration 1.
Y4 Use factory configuration 2
Z Resets modem.
Z0 Resets modem to NVRAM profile selected by Y command or
dip 7.
Z1 Resets modem to NVRAM profile 0
Z2 Resets modem to NVRAM profile 1
Z3 Resets modem to factory default profile 0 (&F0)
Z4 Resets modem to factory default profile 1 (&F1)
Z5 Resets modem to factory default profile 2 (&F2)
220/CONNECT 52000 * * * *
224/CONNECT 53333 * * * *
228/CONNECT 54666 * * * *
232/CONNECT 56000 * * * *
Adaptive Dialing * * *
Wait for 2nd Dial Tone
(W)
* *
Wait for Answer (@) * *
Fast Dial * *
Table6-1
Result Codes X0 X1 X2 X3 X4