Product manual

41
Appendix F Mech. Dimensions
Depending on the acceptability of mechanical interference with adjacent slots and the thermal dissipation
need, three different solutions are possible.
1) For the best cooling of the PMC use both the heat sink and the fan, the fan will not fit if another
card occupies Slot B the adjacent slot, and will come to within 0.465 inches of Slot C.
2) For the next best cooling of the PMC remove the and use the heat sink only. The heat sink will
come to within 0.310 inches of the card in Slot B.
3) If setup 2 is not acceptable the heat sink can be removed, however this has the disadvantage of
leaving the front part of the PMC unsupported.
Figure 24 Adjacent slot interference, dimensions in inches