Product manual

PCI Express to PMC adapter Copyright © 2011, Technobox, Inc
35
2 (Use Fixed RPM): This fan control algorithm always forces the fan speed to the desired Fixed RPM and
does not change the fan speed regardless of the Carrier or Heat Sink Temperature. In this algorithm the
maximum desired Heat Sink Temperature is not used.
A to H: These commands update the maximum desired Heat Sink Temperature to use in the Fan Control
Algorithms 0 (Minimize Fan) and 1 (Use Heat Sink). The default value is 50.
L to Q: These commands update the desired fixed RPM value to use in the Fan Control Algorithm 2 (Use
Fixed RPM). The default value is 3500 RPM.