Installation Guide

5
Installation Instructions
1/2”
Step 1
Step 2
1
2
Add plumber's tape to nipple and screw inlet tting (2)
onto nipple (3).
Add plumber's tape to nipple and screw nipple (3) into
pipe. Make sure you leave 1/2" o the wall. Use nipple
extensions as needed.
Slide escutcheon (6) o top and bottom.
Top: Unscrew set screws (5) and remove inlet tting (2).
Bottom: Unscrew set screw (5) and remove bottom wall
mount (10).
Top
Bottom
Step 1
Step 2
2.1