Riviera Shower System Model #7001-BN & 7001-CH PW-97001-6525BRN & PW-97001-6525CP Owner's Manual
Riviera Shower System / PW-97001-6525BRN / PW-97001-6525CP Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Parts Legend 1. Showerhead.....................1 2. Shower Arm.....................1 3. Top-T.................................1 4. Set Screws........................5 5. O-Ring...............................9 6. Escutcheon......................2 7. Check Valve......................1 8. Inlet Nipple.......................1 9. Inlet Nipple Extension....1 10. Inner Pipe.........................1 11. Shower Pipe.....................1 12. Handshower Slider.........1 13. Body Jets..........................3 14.
Installation Instructions BEFORE YOU BEGIN Measure the following to ensure your Shower System will fit properly. New Construction 13” minimum Retrofit 13” minimum 28” minimum 28” minimum Make sure distance from water outlet and mixing valve Remove existing shower arm and shower head. Make sure trim (NOT INCLUDED) is a minimum 28" or more. distance from water outlet and mixing valve trim (NOT INCLUDED) is a minimum 28" or more.
Installation Instructions 1 2 Step 1 Step 2 Optional Step 2 Step 1 Connect shower pipe (11) with Top-T (3) shower arm (2) and secure with set screw (4). 3 Mixing valve (NOT INCLUDED) [Step 1] Apply a generous amount of PTFE (plumber's) tape Slide escutcheon (6), insert washer (26), and screw to end of end of nipple. showerhead (1) to shower arm (2) and secure. [Step 2]Screw nipple into fitting which old shower arm was screwed into. Use allen wrench provided to secure. DO NOT OVERTIGHTEN.
Installation Instructions 4 6 CAUTION: Live Plumbing Attach assembled shower to inlet nipple (8) and secure set screws (4) with allen wrench (24) provided. Drill wall mount (17), place it on marked location and mark holes for drilling. Set wall anchors (16) in place. Place the wall mount (17) on marked location for easy, steady, installation. Drill mounting screws (18) into place.
Installation Instructions 8 9 Attach swivel joint (22) to shower pipe (11). Insert washer (26) into the hex end of the handshower hose (15). Attach hose (15) to swivel joint (22) on the diverter body (19). Insert washer (26) into the tapered end of the handshower hose (15) and attach the handshower (14). Place the tapered end of the hose into the hand shower holder (12).
Usage Diverter valve controls the showerhead, handshower, and body spray functions. Turn diverter knob right or left to the desired setting. The diverter will click into place at each function. The shower arm height is adjustable by sliding the arm up or down while holding the shower pipe with your free hand. The arm also swings freely to the left or right by gently pressing on the arm or showerhead.
