Installation Guide

2
Riviera ShowerSpa Installation Instructions
BEFORE YOU BEGIN
Measure the following to ensure your
Riviera ShowerSpa will t properly
1
)
Center of existing shower arm to top of valve trim ring.
Minimum 27.25" required.
2
)
Center of existing shower arm to top of ceiling.
Minimum 13" required.
Parts and Tools Required
Please lay out and become familiar with all parts prior to
assembly.
Read all instructions once before beginning and contact Cus-
tomer Support if you have any questions at 1-888-785-7320
(
8:30 am – 5:00 pm pacic time Monday – Friday
)
For more information visit www.pulseshowerspas.com
Parts List
1) Shower Arm
1.2) Shower Arm Connector
2) O Ring
3) Nipple
4) O Ring
5) Height Adjustment parts
6) Inlet Fitting
7) Set Screw
8) Check Valve
9) O Ring
10) Escutcheon
11) Check Valve
12) Inlet Nipple
13) O Ring
14) Inlet Nipple Extention
15) Shower Pipe
16) Hand Held Slider
17) O Ring
18) Body Jets
19) Inner Pipe
20) O Ring
21) O Ring
22) O Ring
23) O Ring
24) Diverter Parts
25) O Ring
26) Swivel Joint
27) Shower Head
28) Hand Shower
29) O Ring
30) Hose
Ceiling
Shower
Arm
Valve
Trim
Ring
13"
27.25"
M INIMUM CLEARANCE