Installation Guide

Toll Free: 888.785.7320
www.PulseShowerSpas.com
Position mounting anges and mark hole locations.
For wood or solid backing applications drill 1/8” pilot holes through
shower wall into wood or metal stud.
NOTE: If wall is tiled, drill a 1/8” pilot hole through tile then change to the
a 5/16” diameter masonry tile drill bit.
HAND HELD HOLDER
INSTALLATION
SHOWER ARM MOUNT
INSTALLATION
Attach shower
arm mount to your
existing shower
arm using supplied
washer.
Shower arm NOT
INCLUDED.
Rev.B
PARTS INCLUDED
• Stainless steel rail
• 3 Function handheld
with ow control
• 72” Shower hose
• Installation manual
• Shower arm mount with
hand held holder
• Hand held slider
Once the ErgoSlideBar is securely fastened to wall, align cover plate
locking tabs with slots in ange. Push cover against mounting until it locks.
STEP 1
STEP 2
STEP 3
INSTALLATION
A
B
C
PRODUCT DIMENSIONS
DETAIL MOUNTING INSTALLATION
Install screws through mounting ange and directly into wood/metal stud
or bracing. Use masonry anchors if necessary.
Flow Control
Check Valve
Built-in