Specifications

www.ti.com Related Documentation From Texas Instruments
SPRAA85 — Programming TMS320x28xx and 28xxx Peripherals in C/C++ explores a hardware
abstraction layer implementation to make C/C++ coding easier on 28x DSPs. This method is
compared to traditional #define macros and topics of code efficiency and special case registers are
also addressed.
SPRA958 — Running an Application from Internal Flash Memory on the TMS320F28xxx DSP covers
the requirements needed to properly configure application software for execution from on-chip flash
memory. Requirements for both DSP/BIOS™ and non-DSP/BIOS projects are presented. Example
code projects are included.
SPRAA91 — TMS320F280x Digital Signal Controller USB Connectivity Using the TUSB3410
USB-to-UART Bridge Chip presents hardware connections as well as software preparation and
operation of the development system using a simple communication echo program.
SPRAAD8 — TMS320x280x and TMS320F2801x ADC Calibration describes a method for improving the
absolute accuracy of the 12-bit ADC found on the TMS320x280x and TMS320F2801x devices.
Inherent gain and offset errors affect the absolute accuracy of the ADC. The methods described in
this report can improve the absolute accuracy of the ADC to levels better than 0.5%. This
application report has an option to download an example program that executes from RAM on the
F2808 EzDSP.
SPRAAI1 — Using the ePWM Module for 0% – 100% Duty Cycle Control provides a guide for the use
of the ePWM module to provide 0% to 100% duty cycle control and is applicable to the
TMS320x280x family of processors.
SPRAA88 — Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x Digital Signal
Controller presents a method for utilizing the on-chip pulse width modulated (PWM) signal
generators on the TMS320F280x family of digital signal controllers as a digital-to-analog converter
(DAC).
SPRAAH1 — Using the Enhanced Quadrature Encoder Pulse (eQEP) Module in TMS320x280x,
28xxx as a Dedicated Capture provides a guide for the use of the eQEP module as a dedicated
capture unit and is applicable to the TMS320x280x, 28xxx family of processors.
SPRA820 — Online Stack Overflow Detection on the TMS320C28x DSP presents the methodology for
online stack overflow detection on the TMS320C28x DSP. C-source code is provided that contains
functions for implementing the overflow detection on both DSP/BIOS and non-DSP/BIOS
applications.
SPRA806 — An Easy Way of Creating a C-callable Assembly Function for the TMS320C28x DSP
provides instructions and suggestions to configure the C compiler to assist with C-callable
assembly routines.
Trademarks
TMS320C28x, C28x are trademarks of Texas Instruments.
SPRU791F – November 2004 – Revised July 2009 Read This First 11
Submit Documentation Feedback