Specifications

EMC-CS-2009.1
© Copyright Ford Motor Company – All Rights Reserved Page 20 of 121
February 11, 2010
Table 7-4: RE 310 Measurement System Setup Requirements (All Bands except M1, M2, M3, EU1, G1)
Swept Receivers Stepped Receivers
Limit A Limit B Limit A Limit B
Detection Method
Peak or Average Quasi-Peak Peak or Average Quasi-Peak
Measurement Bandwidth {MBW}
(kHz)
9/10
(2)
120 9/10
(2)
120
Video bandwidth (kHz)
 3*MBW n/a
Frequency sweep rate
(sec/kHz)
 0.003  0.001
Frequency Step Size (kHz)
0.5*MBW 60
Measurement Time per Frequency
Step (sec )
(2)
0.005 1
1. To allow the use of various receiver types, either bandwidth may be used
2. Sweep rate and measurement time may be increased for low repetition rate signals. See section 7.2.2 for details
Table 7-5: RE 310 Measurement System Setup Requirements (Bands M1, M2, M3)
Swept Receivers Stepped Receivers
Limit A Limit B Limit A Limit B
Detection Method
Average Quasi-Peak Average Quasi-Peak
Measurement Bandwidth {MBW}
(1)
(kHz)
120 120 120 120
Video bandwidth (kHz)
 500 n/a
Frequency sweep rate
(sec/kHz)
 0.003  0.001
Frequency Step Size (kHz)
60 60
Measurement Time per Frequency
Step (sec )
(1)
0.005 1
1. Sweep rate and measurement time may be increased for low repetition rate signals. See section 7.2.2 for details