Specifications

EMC-CS-2009.1
© Copyright Ford Motor Company – All Rights Reserved Page 16 of 121
February 11, 2010
Table 7-2: RE 310 Level 2 Requirements
Limits (dBµV/m)
Limit A Limit B
Band
#
Region
RF Service
(User Band in MHz)
Requirement
Frequency Range
(MHz)
PK
(2, 3)
AVG
(2, 3,4)
QP
(2, 3)
EU1 Europe Long Wave 0.15 - 0.28 35 53
G1 Global Medium Wave (AM) 0.53 - 1.7 12 30
NA1 North America
DOT 1
(45.68 - 47.34)
45– 48
(1)
12 6 24
G2 Global
4 Meter
(66 – 87.2)
65 – 88
(1)
18 12 24
JA1 Japan
FM 1
(76 – 90)
75 – 91
(1)
18 12 24
G3 Global
FM 2
(87.5 – 108)
86 – 109
(1)
18 12 24
G4 Global
2 Meter
(142 – 175)
140– 176
(1)
18 12 24
EU2 Europe
DAB 1
(174.1 – 240)
172 – 242
(1)
18 12 24
G5 Global RKE, TPMS 1 310 - 320 20 14 30
EU3 Europe Tetra 380 - 422 25
19
30
G6 Global RKE , TPMS 2 429 -439 25 19 30
EU4 Europe Police 440 - 470 25 19 30
EU 5
Europe
RKE 868 - 870 30 24
EU6
Europe
RKE 902 -904 30 24
EU7 Europe DAB L-Band 1447 - 1494 36 30
1567 - 1574
50 - 20664*log(f /1567)
(5)
1574 - 1576 10
G8 Global GPS
1576 - 1583
10 + 20782*log(f /1576)
(5)
1 User band with ~1% guard band. Applicable only for bands NA1, G2, JA1, G3, G4, EU2
2 Limits based on detection method. AVG= Average detection, PK= Peak detection, QP = Quasi-Peak detection
3 Limit A, PK and AVG values are based on use of a 9/10 kHz MBW (all bands except EU1, G1). Limit B, QP values (EU1, G1)
are based on a 9 kHz MBW. Limit B, QP values (all bands except EU1, G1) are based on a 120 kHz MBW.
4 Average Detection limits may not be used for components that operate with intermittent duration.
5 f = Measurement Frequency (MHz)