Specifications

EMC-CS-2009.1

February 11, 2010

7.0 Radiated RF Emissions: RE 310

The requirements, delineated in Tables 7-1 and 7-2 are applicable to the following component categories:

Electronic Modules: A, AS, AM, AX, AY, AW, EM

7.1 Requirement

Radiated emissions requirements cover the frequency range from 0.15 to 1583 MHz. Requirements are linked directly to

specific RF service bands, which are segregated into Level 1 and Level 2 requirements.

Level 1 requirements are based on latest version of European directive 72/245/EEC .

• Limit A is based on use of Average detection.

• Limit B is based on use of Quasi Peak Detection.

Level 2 requirements are based on specific customer requirements.

• Limit A is based on use of Peak and Average detection. With the exception of Bands EU1, G1and G8, the component

is only required to demonstrate compliance to either the Peak or Average limit (Bands EU1, G1, G8 are based only on

Average detection). Average limits are applicable only for components that operate with continuous duration.

Components that operate with intermittent duration are only required to meet the Peak limits.

• Limit B is based on Quasi Peak Detection.

Table 7-1: RE 310 Level 1 Requirements

Limits (dBµV/m)

Band

Frequency Range

(MHz)

Limit A

AVG

(1, 2)

Limit B

(1)

M1 30 - 75 52- 25.13*Log(f /30) 62 - 25.13*Log(f /30)

M2 75 – 400 42 + 15.13*Log(f /75) 52 + 15.13*Log(f /75)

M3 400 - 1000 53 63

1 f = Measurement Frequency (MHz)

2 Limit A is based on use of a 120 kHz MBW with Average Detection.