Installation Guide

INSTALLATION INSTRUCTIONS

REMOVE EXISTING SHOWERHEAD:

Be careful not to unscrew shower arm.

INSTALL YOUR NEW GENIE SHOWERHEAD:

Check showerhead to ensure washer and restrictor

are in place. Carefully align threads and hand-tighten

rmly. Do NOT overtighten. Do NOT use a wrench

or pliers.

Tilt infrared sensor up or down

to adjust range.

Switch showerhead functions by simply

waving your hand in front of infrared

sensor.

LED changes color according to water temperature:

• <81˚F BLUE

• 81˚F TO 106˚F GREEN

• > 106˚F RED

FLOW RESTRICTOR

WASHER

Toll Free: 888.785.7320

www.PulseShowerSpas.com

WARRANTY

Please visit www.PulseShowerSpas.com

for our Manufacturer’s Limited Lifetime Warranty.

INSTALLATION QUESTIONS?

Before returning your Genie ShowerHead to the store,

if you have any questions about installation or missing parts please visit

our CUSTOMER CARE page at www.PulseShowerSpas.com.

We are here to help you.

PAGE 1
INSTALLATION INSTRUCTIONS REMOVE EXISTING SHOWERHEAD: Be careful not to unscrew shower arm. INSTALL YOUR NEW GENIE SHOWERHEAD: Tilt infrared sensor up or down to adjust range. Check showerhead to ensure washer and restrictor are in place. Carefully align threads and hand-tighten firmly. Do NOT overtighten. Do NOT use a wrench or pliers. WASHER FLOW RESTRICTOR LED changes color according to water temperature: • <81˚F BLUE • 81˚F TO 106˚F GREEN • > 106˚F RED WARRANTY Please visit www.PulseShowerSpas.