Installation Guide

5
Installation Instructions
lube
Step 1
Step 3
Step 2
1
2
CAUTION: Live Plumbing
OR
Remove set screws (2x) from Top-T (30) and remove
inlet tting.
2. Slide inlet tting (9) onto nipple (4) and secure with
set screw.
OR
2.1. Mark inlet tting (9) holes on wall before mounting.
Secure with set screw. Drill the holes and secure with
wall anchors and screws.
USE LUBE (INCLUDED) FOR O-RING
[Step 1] Apply a generous amount of PTFE (plumber's)
tape to end of end of nipple (4).
[Step 2]Screw nipple into tting which old shower arm
was screwed into. Use allen wrench provided to secure.
DO NOT OVERTIGHTEN.
[Step 3] Screw ow restrictor into nipple(4).
DO NOT OVERTIGHTEN.
Step 1
Step 3
Step 2
2.1
Mixing valve
(NOT INCLUDED)