Installation Guide

6.1

6.2

Drill Option

CAUTION: Live Plumbing

Drill-less Option

Hold for about 30 seconds to dry. Tape will be fully

cured after 24 hours.

lube

Remove plastic cover and slide Shower Arm (15)

onto Top-T (30). Connect Shower Head (17). Slide in

escutcheon (11). Screw shower head (17) onto shower

arm (15). Allen wrench with 2 size ends

Slide in cover mount (24).

Use level to assure shower pipe is straight and mark

lower diverter (29) mount location.

Place lower mount plate (26) on marked location and

mark holes for drill option.

Slide in Top-T and secure with set screw (14).

Installation Instructions