RIO Rio ShowerSpa Model #1049B-BN Owner’s Manual
Rio ShowerSpa Model 1049B-BN Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
250 mm 9.84 in 150 mm 5.91 in 425 mm 16.73 in 230 mm 9.06 in 230 mm 9.06 in 1219 mm 48 in 880 mm 34.65 in 1350 mm 53.15 in 925 mm 36.42 in 770 mm 30.32 in Product Dimensions 533 mm 21 in 394 mm 15.50 in 254 mm 10 in Top 280 mm 11.
Parts Legend 2 3 1 5 11 13 10 4 12 9 7 5 8 1. ShowerSpa 2. Shower Arm Escutcheon 3. Shower Arm 6 4. Shower Head 5. Rubber Washer......8(4 extra) 6. Hand Shower Hose 7. Hand Shower 8. Hand Shower Holder 9. Hand Shower Holder Nut 10. Mounting Screw..................4 11. Wall Mount Bracket............2 12. Nylon Wall Anchor..............4 13.
Assembly After unpacking your ShowerSpa, some assembly is required prior to installation. Shower Arm Assembly 1. Place escutcheon (2) over threaded end of shower arm (3) and insert through shower arm hole. Use stainless nut (13) at front of panel and secure shower arm to ShowerSpa. 2. Attach hose fitting to shower arm (3) ensuring rubber washer is still in hose fitting. Do not over-tighten. Hand Shower Holder Assembly 1.
Retrofit – Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE ShowerSpa model that covers the location of your existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e. wallboard, tile, fiberglass, etc).
Usage Pressure Balance Mixing Valve The Rio ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the desired flow rate is achieved. Rotate to the right to decrease temperature and rotate to the left to increase temperature.
Manufacturer’s Limited Warranty PULSE ShowerSpas, Inc. warrants that all ShowerSpas are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.
