Owner's Manual

7
Usage
Pressure Balance Mixing Valve
This ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water ow and temperature.
The valve automatically adjusts to changes in water pressure (i.e. someone ushes a toilet), keep ing your tem-
perature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the
desired ow rate is achieved. Rotate to the right to decrease temperature and rotate to the left to
increase temperature.
Brass Diverter
This ShowerSpa oers independent control of each function - showerhead, handshower, and/or body jets. Water
pressure can be directed to a single function or split between the dierent functions via the three diverter control
handles.
Body Jets
There are two single-function jets with silicone tips for rub clean, Spray-Straight™ performance.
Handshower
The brass handshower has a sleek wand-shaped design that delivers a satisfying power-spray pattern with a
stainless steel stretch hose.
Turning Shower ON/OFF
The on/o of the shower should be controlled by the on/o of the valve. It is not recommended to leave the valve
in the on position and rely on the diverters to turn the water o.
Care and Maintenance
Always blot dry any water from the surface of your ShowerSpa. To protect your ShowerSpa from hard water
stains and mineral deposits, use an auto spray wax periodically and wipe down your ShowerSpa after each use.
Allowing water to evaporate on the surface can lead to a buildup of mineral deposits. Cleaning with a damp,
nonabrasive sponge and drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.
REMEMBER
NEVER use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!