Malibu ShowerSpa Model #1043-SSB PW-91043-2125BSS Owner's Manual
Malibu ShowerSpa Model #1043-SSB / PW-91043-2125BSS Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Dimensions 17.71 in. - 450 mm 100° 57.08 in. - 1450 mm 0.78 in. 19.8 mm 0.59 in. 15 mm 11.42 in. 290 mm 35.43 in. - 900 mm 0.60 in. 15.2 mm 6.3 in. 160 mm 2.75 in. 70 mm 7.87 in.
Parts Legend 1. ShowerSpa 5. 90° Elbow/Supply Line 9. Handshower Holder 2. Screw............................4 6. Rubber Washer......................3 10. Handshower Hose 3. Mounting Bracket......2 7. Nut 11. Handshower 4. Wall Anchor.................4 8. Washer 12.
Assembly After Unpacking Your ShowerSpa, Some Assembly Is Required Prior To Installation Handshower Holder Assembly 1. Insert handshower holder (9) into hole located on side of ShowerSpa and secure with washer (8) and nut (7). 2. Secure nut (7) with adjustable wrench if needed. 3. Attach supply line (5) with rubber washer (6) installed to the handshower holder (9). Securely tighten to ensure no leaks. Do not overtighten. After ShowerSpa Is Mounted To The Wall Connect The Handshower 1.
nstallation New Construction or Extensive Remodel – New Finished Wall Surface 1. Prior to sheetrock, stub-out ½" hot and cold supply lines beyond finished wall surface, 4" on center. For best results, attach 90° brass fittings (available at most hardware stores) to the stub-outs maintaining ¼" – ½" of space between the fitting and finished wall. The open end of the 90° brass fittings should point down so the supply lines attach parallel to the wall. 1 2.
Usage Pressure Balance Mixing Valve This ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the desired flow rate is achieved. Rotate to the right to decrease temperature and rotate to the left to increase temperature.
Manufacturer’s Lifetime Limited Warranty 1. Defects Covered; Warranty Period. Pulse Shower Spas, Inc. (“Pulse”) warrants to the original consumer purchaser who purchases this shower spa (the “Product”) for use in his or her own home, that the Product will be free from defects in material and manufacturing workmanship for as long as the original consumer purchaser owns that same home.
