Installation Guide

7
Usage
Pressure Balance Mixing Valve
The Malibu ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and
temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keep-
ing your temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the
handle until the desired flow rate is achieved. Rotate to the right to decrease temperature and rotate to the left
to increase temperature
Brass Diverter
The Malibu ShowerSpa offers independent control of each function - shower head, hand shower, and/or body
jets. Water pressure can be directed to a single function or split between the different functions via the three
diverter control handles.
Hand Shower
The brass hand shower has a sleek wand-shaped design that delivers a satisfying power-spray pattern with a
1.5M - 1.8M stainless steel stretch hose.
Body Jets
There are two single-function jets with silicone tips for rub clean, Spray-Straight™ performance.
Care and Maintenance
Always blot dry any water from the surface of your ShowerSpa. To protect your ShowerSpa from hard water
stains and mineral deposits, use an auto spray wax periodically and wipe down your ShowerSpa after each use.
Allowing water to evaporate on the surface can lead to a buildup of mineral deposits. Cleaning with a damp,
non-abrasive sponge and drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.
Showerhead, handshower, and body jets have silicone rubber tips that should be rubbed periodically to help
break up any mineral deposits. This will ensure long lasting, Spray-Straight™ performance.
REMEMBER
Never use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!