Owner's Manual

7
Usage
Pressure Balance Mixing Valve
This ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water ow and temperature. The
valve automatically adjusts to changes in water pressure (i.e. someone ushes a toilet), keeping your temperature
constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the desired ow
rate is achieved. Rotate to the right to decrease temperature and rotate to the left to increase temperature. Be sure
that the handle is in the OFF position when you are done using your ShowerSpa so that pressure does not build up
inside the unit.
Brass Diverter
The Four-way Simple Select™ diverter eortlessly selects your desired function. Simply rotate the diverter knob
either direction to select functions—showerhead, handshower, body jets, or tub spout.
Body Jets
There are six single-function brass Silk Spray Jets™ that provide soothing spray. You can adjust the angle of spray
by pushing on the front edge of the jet in any direction. Jet face easily disassembles for cleaning ensuring peak
performance.
Handshower
The ve-function handshower, equipped with a stainless steel stretch hose, has a large design that delivers easy
function selection by twisting the face.
Care and Maintenance
Always blot dry any water from the surface of your ShowerSpa. To protect your ShowerSpa from hard water
stains and mineral deposits, use an auto spray wax periodically and wipe down your ShowerSpa after each use.
Allowing water to evaporate on the surface can lead to a buildup of mineral deposits. Cleaning with a damp,
nonabrasive sponge and drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.
REMEMBER
NEVER use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!