Installation Guide

7
Usage
Pressure Balance Mixing Valve
This ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and temperature.
The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your
temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle
until the desired flow rate is achieved. Rotate counter-clockwise to decrease temperature and rotate clockwise
to increase temperature. Be sure that the handle is in the OFF position when you are done using your
ShowerSpa so that pressure does not build up inside the unit.
Brass Diverter
The Four-way Simple Select™ diverter effortlessly selects your desired function. Simply rotate the diverter knob
either direction to select functions—shower head, hand shower, body jets, or tub spout.
Hand Shower
The five-function hand shower, equipped with a 1.5M - 1.8M stainless steel stretch hose, has a large design that
delivers easy function selection by twisting the face.
Body Jets
There are six single-function brass Silk Spray Jets™ that provide soothing spray. You can adjust the angle of
spray by pushing on the front edge of the jet in any direction. Jet face easily disassembles for cleaning ensuring
peak performance.
Care and Maintenance
Always blot dry any water from the surface of your ShowerSpa. To protect your ShowerSpa from hard water
stains and mineral deposits, use an auto spray wax periodically and wipe down your ShowerSpa after each use.
Allowing water to evaporate on the surface can lead to a buildup of mineral deposits. Cleaning with a damp,
non-abrasive sponge and drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.
Body jets may need to be cleaned to improve performance. To remove, simply use adjustable wrench to secure
jet while rotating outside perimeter counter-clockwise by hand. To clean, use soft brush to dislodge any debris/
blockage then re-assemble.
REMEMBER
Never use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!