SANTA CRUZ Santa Cruz Showerspa Model #1033 Installation Instructions
Santa Cruz ShowerSpa Model #1033 Please Read The Following Instructions COMPLETELY Before Beginning! Stub-Out Location ESTIMATED MOUNTING HEIGHT AND STUB-OUT LOCATION FOR INDIVIDUALS 5'8"– 6'2" Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting.
Parts Legend Assembly 1. ShowerSpa 4. Handheld Hose 8. Mount Bracket................ (2) 2. Handheld Shower 5. Handheld Holder 9. Handheld Hose Outlet 3. Rubber Washer............... (6) (3 extra) 6. Mounting Screw............. (6) 10. Thermostatic Valve 7. Nylon Anchor.................. (6) 11. Diverter Knobs After installing your ShowerSpa, some assembly is required Handheld Holder Installation 1. Locate the desired mounting location of the handheld holder (6) and mark the holes.
Installation – Retrofit Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE ShowerSpa model that covers the location of existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e.
Manufacturer’s Limited Warranty PULSE Shower Spas, Inc. warrants that all ShowerSpas are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.
