Installation Guide

2
Lanikai ShowerSpa Installation Instructions
BEFORE YOU BEGIN
Measure the following to ensure your
Lanikai ShowerSpa will fit properly
1
)
Center of existing shower arm to top of valve trim ring.
Minimum 27½"
(
69.8cm
)
required.
2
)
Center of existing shower arm to top of ceiling.
Minimum 10"
(
25.4cm
)
required.
Parts and Tools Required
Please lay out and become familiar with all parts prior to assembly.
Read all instructions once before beginning and contact Customer
Support if you have any questions at 1-888-785-7320
(
8:30 am – 5:00 pm pacic time Monday – Friday
)
or email
[e-mail].
For more information visit www.pulseshowerspas.com
/
lanikai.
Parts List
A) Shower Arm – 1
B) Top Tee – 1
C) Inlet Fitting – 1
C-1) Check Valve/Flow Restrictor – 1
C-2) Screen – 1
C-3) Retaining Clip – 1
D) 2" NPT Brass Nipple – 1
E) Shower Pipe – 1
F) Escutcheon – 2
G) Lower Mount w/ Tape – 1
H) Shower Head – 1
I) Hand Shower – 1
J) Flexible Hose – 1
K) Set Screw – 1
L) Set Screw – 2
M) Rubber Washer – 4
(1 extra)
N) Teon Tape – 1
O) Optional Screws – 2
P) Optional Wall Anchors – 2
Q) 2.5mm Allen Wrench – 1
R) Actuator
R-1) Actuator Housing
R-2) Actuator Piston
R-3) Brass Fitting
S) Diverter
S-1) Cartridge
S-2) Retaining Nut
S-3) Handle
Tools Required
Adjustable Wrench
Pencil
Allen Wrench 2.5mm
(
supplied
)
Level
(
optional
)
Drill with 6mm
(
¼"
)
masonry bit
(
optional
)
Flashlight
(
optional
)
C-1
C-2
C-3
Ceiling
Shower
Arm
Valve
Trim
Ring
10"
25.4cm
27½"
69.8cm
M INIMUM CLEARANCE