NAVAJO Navajo ShowerSpa Model #1018 Owner's Manual
Navajo ShowerSpa Model #1018 Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Stub-Out Location ESTIMATED MOUNTING HEIGHT AND STUB-OUT LOCATION FOR INDIVIDUALS 5'8"– 6'2" 18" 8" 90˚ Fittings Not Included 35" 53" 4" 20" Mark bottom of ShowerSpa Height is completely dependent on personal preference based on height of users 3
Parts Legend 1. 2. 3. 4. 5. 6. 7. Shower Head Shower Arm Handheld Shower Handheld Mount Glass Shelf Stainless Steel Hose (ORB) Shower Panel Wall Mount 8. 9. 10 11. 12. 13. 14. Tapered End of Hose Hexagon Nut End of Hose Soft Washer................................................(2) . Shower Arm Nuts.......................................(2) Mounting Screw Panel Bracket.................(2) Mounting Anchor Panel Bracket...............(2) Mounting Screw Handheld Mount (blk)...(2) 15. 16. 17. 18. 19. 20.
Assembly After installing your ShowerSpa, some assembly is required Shower Arm 1. Align two mounts with pre-drilled holes in ShowerSpa. To align top mount loosen allen set screw (#19) inside mount and adjust accordingly to fit top hole. Insert threaded mount through holes in ShowerSpa and secure with soft washer (#10) and nut (#11) supplied. Tighten set screw (#19) inside mount. CAUTION: Do NOT over-tighten set screw. Attach shower head supply line to the lower shower arm mount.
Installation – Retrofit Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE ShowerSpa model that covers the location of existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e.
Usage Pressure Balance Mixing Valve The Navajo ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the desired flow rate is achieved. Rotate to the right to decrease temperature and rotate to the left to increase temperature.
Manufacturer’s Limited Warranty PULSE Shower Spas, Inc. warrants that all ShowerSpas are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.
