Installation Guide

5
Installation Instructions
Step 1: Mark trim holes on wall with a pencil. Use a
level to make sure everything is leveled.
Make sure you have 0.75 inches on nipple protruding
from wall
Drill holes onto wall
0.75”
Tile
Trim
Tile
Studs
0.75”
Tile
Trim
Tile
Studs
5 8
9
6
Add anchors and secure trim with the provided screws.
Make sure the nished side of the trim in facing outward
Used the nished nuts. Screw onto nipple at side rst
(against trim) and secure.
7