Installation Guide

Fold Away Diverter Tub Spout

Model #3011-TS-BN, 3011-TS-CH, 3011-TS-MB, 3011-TS-ORB

PW-93011-37SPBRN, PW-93011-37SPCP, PW-93011-37SPBM, PW-93011-37SPBRZ

Owner's Manual

1. Inlet Nipple

2. Set Screw

3. Spout Body

4. Allen Wrench

Installation Instructions

Parts

Add plumber's tape to threaded end and attach

inlet nipple (1) into plumbing. Tighten using allen

wrench (4) included.

Slide spout body (3) onto nipple (1) to

desired position.

Secure with set screw (2)

PM-AA-02

Move spout left or right to divert from

showerhead to tub spout.

Tub Spout

Divert to

Showerhead

Divert to

Showerhead

Operation

PAGE 1
Fold Away Diverter Tub Spout Model #3011-TS-BN, 3011-TS-CH, 3011-TS-MB, 3011-TS-ORB PW-93011-37SPBRN, PW-93011-37SPCP, PW-93011-37SPBM, PW-93011-37SPBRZ Owner's Manual Parts 1. Inlet Nipple 2. Set Screw 3. Spout Body 4. Allen Wrench Installation Instructions 1 Add plumber's tape to threaded end and attach inlet nipple (1) into plumbing. Tighten using allen wrench (4) included. 3 2 Slide spout body (3) onto nipple (1) to desired position.
PAGE 2
Usage Care and Maintenance Swivel diverting tub spout controls the showerhead and tub spout. Refer to drawings on "OPERATION" step. To keep your tub spout looking new, wipe down after each use with a soft cotton cloth. Always turn cold water on first to help prevent any accidental burning or scalding; especially for children and elderly. Protect your tub spout from hard water stains and mineral deposits by periodically using an auto spray wax. DO NOT use any part as a support device.