Lanai Shower System Model #1089-BN & 1089-CH PW-91089-7325BRN & PW-91089-7325CP Owner's Manual
Lanai Shower System/PW-91089-7325BRN/PW-91089-7325CP Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Parts Legend 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Anchors............................8 Plumber's Tape Check Valve.....................2 Nipple Flow Restrictor Big Hex Wrench 8mm Gasket Set Screw M6x8mm......2 Inlet Fitting Screws M4x25mm.........8 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Escutcheon Allen Wrench 2.5/3mm Set Screw Set Screw M5x5mm..............2 Top T Shower Arm Washer.....................................3 Showerhead Shower Pipe Body Jets 21. Handshower 22. Handshower Hose 23.
Installation Instructions BEFORE YOU BEGIN Measure the following to ensure your Shower System will fit properly. New Construction 13” minimum Retrofit 13” minimum 28” minimum 28” minimum Make sure distance from water outlet and mixing valve Remove existing shower arm and shower head. trim (NOT INCLUDED) is a minimum 28" or more. Make sure distance from water outlet and mixing valve Make sure the distance from the water outlet and the trim (NOT INCLUDED) is a minimum 28" or more.
Installation Instructions 1 2 Step 1 Step 3 Step 2 OR 2.1 Mixing valve (NOT INCLUDED) CAUTION: Live Plumbing [Step 1] Apply a generous amount of PTFE (plumber's) (2) Remove set screws (2x) from Top T (15) and remove tape to end of end of nipple (4). inlet fitting. [Step 2]Screw nipple (4) into fitting which old shower arm was screwed into. Use allen wrench provided to secure. 2. Slide inlet fitting (9) onto nipple (4) and secure with DO NOT OVERTIGHTEN. set screw.
Installation Instructions 6 3 Remove plastic cover and slide shower arm (16) onto Use level to assure shower pipe is straight and mark lower Top T (15). Connect showerhead (18). Slide in escutcheon (11). diverter (24) mount location. Screw showerhead (18) onto shower arm (15). Allen wrench with 2 size ends 4 6.1 Drill Option CAUTION: Live Plumbing Place lower mount plate (27) on marked location and mark Slide in Top T (15) and secure with set screws (14). 5 holes for drill option. 6.
Installation Instructions 7 9 Slide bottom diverter (24) and cover mount (25) onto lower mount plate (27) and secure with set screw (26). 8 Insert washer (17) into the hex end of the hand shower hose Product Fully Assembled (22). Attach hose to handshower outlet located on the bottom of the diverter (24). Insert washer (17) into the tapered end of the handshower hose (22) and attach the handshower (21). Place the tapered end of the hose into the handshower holder (23).
Usage Diverter valve controls the showerhead, handshower, and body jets. Turn diverter clockwise to swicth functions. Position between two functions to be used simultaneously. Care and Maintenance To keep your Shower System looking new, wipe down after each use with a soft cotton cloth. Turn face of hand shower to switch settings. Protect your Shower System from hard water stains and mineral deposits by periodically using an auto spray wax.
