Saturn Shower System Système de douche Saturn Model # Modèle # 1058-CH PW-91058-7818CP & PW-91058-7825CP Owner's Manual Manuel du propriétaire
Saturn Shower System/PW-91058-7818CP/PW-91058-7825CP Please Read The Following Instructions COMPLETELY Before Beginning! Veuillez lire les instructions suivantes COMPLÈTEMENT avant de commencer! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting.
Parts Legend 1. 2. 3. 4. 5. Inlet Fitting Set Screws..........................2 Big Hex Wrench 8mm Allen Wrench 2.5/3mm Plumber's tape 6. 7. 8. 9. 10. Glue Lube Shower Arm/Riser Showerhead Shower Body 11. Handshower Holder 12. Handshower 13. Body Jets 14. Diverter 15. Hose 16. Washer........................3 Légende des pièces 1. Raccord d’entrée 2. Vis de réglage........................2 3. Grosse clé hexagonale 8 mm 4. Clé Allen 2,5/3 mm 5. Ruban à plomberie 6. Colle 7. Lubrifiant 8.
Installation Instructions Instructions d’installation BEFORE YOU BEGIN AVANT QUE TU COMMENCES Measure the following to ensure your Shower System will fit properly. Mesurez ce qui suit pour vous assurer votre système de douche s’adaptera correctement.
Installation Instructions Instructions d’installation 1 Step 1 Étape 1 2 Step 2 Étape 2 Apply lube (7) on shower arm/riser (8) O-ring and connect it to shower body (10). Appliquez du lubrifiant (7) sur le joint torique de la colonne/le bras de douche (8) et connectez-le au bâti de la douche (10). 3 Mixing valve (NOT INCLUDED) Vanne mélangeuse (NON INCLUS) [Step 1] Apply a generous amount of plumber's tape (5) to inlet fitting (1).
Installation Instructions Instructions d’installation 4 Connect shower body (10) to inlet fitting (1) and secure with set screw (2). Connectez le bâti de douche (10) sur le raccord d’entrée (1) et fixez à l’aide des vis de réglage (2). 5 7 Insert washer (16) into the hex end of the hand shower hose (15). Attach hose to handshower outlet located on the bottom of the diverter (14). Insert washer (16) into the tapered end of the handshower hose (15) and attach the handshower (12).
Usage Utilisation Diverter valve controls the showerhead, handshower, and body jets. Turn diverter to switch functions. Position between two functions to be used simultaneously. Turn face of handshower to switch settings. Adjust the handshower position by depressing the button on the hanger and sliding up or down the shower pipe. This system is equipped with PULSE PowerSpray™ body jets, to turn off top two jets, turn the jet counter clockwise.
NOTES PULSE ShowerSpas, Inc. | 297 Anna Street | Watsonville, CA 95076 | 831.724.7300 www.PulseShowerSpas.com PULSE20-REV.
