Installation Instructions

5
Assembly
After Unpacking Your ShowerSpa, Some Assembly Is Required Prior To Installation
Shower Arm Assembly
1. Place escutcheon (2) over threaded end of shower arm (3) and insert through shower arm hole. Use stainless nut (13) at front of panel
and secure shower arm to ShowerSpa.
2. Attach hose tting to shower arm (3) ensuring rubber washer is still in hose tting. Do not over-tighten.
Handshower Assembly
1. Insert washer (5) into hexagon shaped end of handshower hose (6) and attach to threaded outlet on bottom of ShowerSpa.
Do not over-tighten.
2. Insert washer (5) into tapered end of handshower hose (6) and attach to handshower (7). Insert handshower into holder (8).
After ShowerSpa Is Mounted To The Wall
Connect The Handshower
1. Insert washer (5) into hexagon shaped end of handshower hose (6) and attach to threaded outlet on bottom of ShowerSpa.
Do not over-tighten.
2. Insert washer (5) into tapered end of handshower hose (6) and attach to handshower (7). Insert handshower into holder (8).
Attach Showerhead
1. Insert rubber washer (5) into showerhead (4) and hand tighten onto the shower arm (3).