User Manual

4 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
Before You Start
Remove all packing and items from the display box. Make sure that the power switch is
turned “OFF” before assembling the scooter.
WARNING:
DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR
Altering of the original components
may or may not be compatible with the design and will void the warranty.
Allow up to 25 minutes for assembly, not including initial charge time.
Allow up to 12 hours for the initial charge (see page 6 for charging information).
Estimated Assembly Time
Required Tools
10 mm / 8 mm
wrench
(included)
two [2] 13 mm
wrenches
(not included)
3 mm hex wrench
5 mm hex wrench
(included)
second
5 mm hex wrench
(not included)
phillips
screw driver
(not included)
battery charger
(included)
thumb switch throttle
brake
NOTE: This scooter does not have a
manual reset button or fuse. It is
integrated into the controller and is
self-resetting.
(not included)
WARNING:
charging port