Instructions / Assembly

7Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Products™ wheels. Worn wheels and bearings are considered normal wear-and-tear and are not covered by the Pulse
Performance Products™ warranty. Wheels other than genuine Pulse Performance Products™ wheels may not be compatible
with your Pulse Performance Products™ scooter. The use of anything other than genuine Pulse Performance Products™
replacement parts may affect your safety and will void your warranty.
Cleaning Your Scooter
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the surfaces.
Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic components or
soften the decals or decal adhesive.
How to Ride
To go: Place one foot onto the deck, push forward with the other foot.
To turn: Steer with both hands on the handlebar to turn. For enhanced cornering, lean slightly into the direction of the turn.
To stop: For controlled stops, apply the brake by stepping on the rear fender brake. Pulse Performance Products™
recommends that you practice applying the brake at various speeds and in an open area free from obstructions before riding
your Pulse Performance Products™ scooter around people and obstacles.
WARNING: Wheelies and other stunt-type riding reduces your ability to maneuver and control your scooter. Take the necessary
precautions such as wearing appropriate protective gear and practice in an area safe for riding that is free from obstructions.