Instructions / Assembly

6 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Set Up and Usage Instructions
Check Before Riding
1. Align handlebars both vertically and horizontally (a) onto handlebar steer tube clamp (b) install handlebar clamp and
hardware (c&d) and tighten evenly and securely with the 5mm hex wrench and 10mm wrench.
2. Lift handlebars up and fully insert into the front fork tube. Adjust quick release clamp adjustment nut, but do not over-tighten.
Fully close clamp lever. To fold down, reverse this sequence of operations.
WARNING: Failure to properly install and tighten the stem tube clamp bolts may cause the rider to lose control and fall. If you
do not understand these instructions or the concept of “tighten securely” seek the assistance of a qualied mechanic.
1.
a
b
c
d
2.1 2.2 2.3
Before you ride always check and for the following:
Safety Gear
Always wear proper protective gear such as:
• Approved safety helmet. (Helmet may be legally required by local law or regulation in your area.)
• Elbow pads and knees pads
• Long sleeved shirt, long pants
• Gloves
• Lace up shoes with rubber soles.
Brake
Check the brakes for proper function. Do not ride the scooter if the brakes are not functioning properly.
Wheels
Inspect the wheels for excess wear and replace if necessary.
Frame, Fork and Components
Always carefully inspect your scooter before you ride. Check for cracks, broken worn or loose components which should be
repaired or replaced before you ride.
Wheels and Bearings
Under normal circumstances and conditions Pulse Performance Products™ wheels and wheel bearings are maintenance
free. Nonetheless, it is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle
bolts for proper tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play,
this is an indication of excess wear and replacement is necessary. Replace immediately with only genuine Pulse Performance