User Manual

8
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Repair and Maintenance
Tools required:
Do not store the battery in temperatures above 70°F (21°C) or below 32°F (0°C).
Disposal: This product contains sealed lead acid batteries which must be disposed or recycled in an environmentally safe manner. Do not
exhausted batteries to a state or federal approved lead acid battery recycler or check with your local retailer of vehicle batteries.
Front Wheel Replacement
Battery Care and Disposal
1. Using 13mm and 17mm wrenches loosen
and remove the front axle by turning the
wrenches counter clockwise.
2. Reinstall new replacement wheel
ensuring to note the order and location of all
components.
3. Using 13mm and 17mm wrenches securely
tighten axle hardware clockwise.
THIS SCOOTER CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN AC-
CORDANCE TO YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND UNDERSTAND THE
FOLLOWING DISPOSAL INSTRUCTIONS:
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
Do not store the battery in temperatures above 70°F (21°C) or below 32°F (0°C).
Make sure to wash your hands after handling batteries as they contain lead compounds.
13mm wrench, 17mm wrench
WARNING:
WARNING: