User Manual

5
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Assembly
Tools required: 13mm wrench, 17mm wrench
Front Wheel Assembly
Handlebar Steer Tube Assembly:
1. Remove and discard protective fork cap. 2. Insert front axle and hardware through front
wheel and fork
3. Ensure that the hardware is correctly
assembled, tighten axle hardware securely
with a 13mm and 17mm wrench.
1. Depress the push button located on the
rear of the fork and insert the handlebar
steer tube onto the fork. The push button
should align with the locator hole in the
handlebar steer tube and lock the steer tube
securely in place.
2. Tighten the bolts with the 5 mm hex
wrench and 10 mm wrench. Tighten bolts
evenly and securely.