User Manual
4 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
Required Tools
10mm/8mm
wrench
(included)
5mm hex
wrench
(included)
Phillips screwdriver
6mm hex wrench
(not included)
Battery charger
(included)
Charging port
On/Off switch
Before You Start
WARNING: Remove all packing and items from the display box. Make sure that the power switch is turned “OFF”
before assembling the quad.
• Allow up to 15 minutes for assembly, not including initial charge time.
• Allow up to 14 hours for the initial charge
(see page 6 for charging information).
Estimated Assembly Time
WARNING: DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR
Altering of the original
components may or may not be compatible with the design and will void the warranty.
Air/tire pump with
pressure gauge for
schrader type valves
(not included)
Throttle
Brake lever
NOTE: the ATV Quad is to be assembled by an adult.