User Manual

4 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Before You Start
WARNING: Remove all packing and items from the display box. Make sure that the power switch is turned
“OFF” before assembling the scooter.
WARNING: DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR
Altering of the original components
may or may not be compatible with the design and will void the warranty.
• Allow up to 25 minutes for assembly, not including initial charge time.
• Allow up to 12 hours for the initial charge (see page 6 for charging information).
Estimated Assembly Time
Required Tools
10 mm / 8 mm
wrench
(included)
two [2] 13 mm
wrenches
(not included)
4 mm hex wrench
(not included)
5 mm hex wrench
(included)
second
5 mm hex wrench
(not included)
phillips
screw driver
(not included)
battery charger
(included)
charging
port
on/off
switch
reset
button
throttle
brake
reset
button