User Manual

6 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Assembly
Tools required: Air/tire pump
pressure maybe lost between the manufacture date and your purchase
date.
Using a hand pump with a Schrader-type valve and pressure gauge
not recommended to use pressurized system similar to the ones found
have much higher air capacity volumes.
REAR
ENSURE REAR TIRE IS AT THE CORRECT PSI BEFORE
RIDING THE MOTORBIKE.
FRONT
Front tire is a solid, puncture proof tire and does not require air
WARNING: It is important to routinely check and maintain
tire pressure as this directly impacts the safety and performance
damage to the tire or the wheel.
REAR TIRE PSI: 36 MAX
Remove valve cap, slide up access cover and align thread on valve
extender onto the valve stem. Attach pump head to the valve and
inflate tire to the recommended PSI called out on the tire sidewall.
Remove the valve extender and replace the valve cap.