User Manual

4 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Required Tools
10mm wrench (not
included)
[2] 13mm/15 mm
wrenches
(included)
6mm hex wrench
(included)
Phillips
screw driver
Valve extender
(included)
(not included)
battery charger
(included)
charging
port
on/off
switch
on/off switch, reset button,
and charging port
reset
button
brake lever
throttle
Before You Start
WARNING: Remove all packing and items from the display box. Make sure that the power switch is turned “OFF”
before assembling the motorbike.
• Allow up to 25 minutes for assembly, not including initial charge time.
• Allow up to 14 hours for the initial charge (see page 7 for charging information).
Estimated Assembly Time
WARNING: DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR
Altering of the original
components may or may not be compatible with the design and will void the warranty.
Air/tire pump with
pressure gauge for
schrader type valves
(not included)