User Manual

12 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Repair and Maintenance
WARNING: Turn the power switch “OFF” before conducting any maintenance procedures.
Tools required: 13mm wrench, 15mm wrench
Front Wheel Removal/Replacement
1. Loosen axle with 13mm and 15mm
wrenches and remove wheel from fork.
2. Install front axle and hardware through
front wheel.
3. Ensure that safety washer tabs are
inserted into fork leg holes “A” and tighten
axle hardware securely with a 13mm and
15mm wrench.